A dynamo, originally another name for an electrical generator, now means a generator that produces direct current with the use of a commutator. Dynamos were the first electrical generators capable of delivering power for industry, and the foundation upon which many other later electric-power conversion devices were based, including the electric motor, the alternating-current alternator, and the rotary converter. They are rarely used for power generation now because of the dominance of alternating current, the disadvantages of the commutator, and the ease of converting alternating to direct current using solid state methods.
The word still has some regional usage as a replacement for the word generator. A small electrical generator built into the hub of a bicycle wheel to power lights is called a Hub dynamo, although these are invariably AC devices.
The dynamo uses rotating coils of wire and magnetic fields to convert mechanical rotation into a pulsing direct electric current through Faraday's law. A dynamo machine consists of a stationary structure, called the stator, which provides a constant magnetic field, and a set of rotating windings called the armature which turn within that field. On small machines the constant magnetic field may be provided by one or more permanent magnets; larger machines have the constant magnetic field provided by one or more electromagnets, which are usually called field coils.
The commutator was needed to produce direct current. When a loop of wire rotates in a magnetic field, the potential induced in it reverses with each half turn, generating an alternating current. However, in the early days of electric experimentation, alternating current generally had no known use. The few uses for electricity, such as electroplating, used direct current provided by messy liquid batteries. Dynamos were invented as a replacement for batteries. The commutator is a set of contacts mounted on the machine's shaft, which reverses the connection of the windings to the external circuit when the potential reverses, so instead of alternating current, a pulsing direct current is produced.
The first electric generator was invented by Michael Faraday in 1831, a copper disk that rotated between the poles of a magnet. This was not a dynamo because it did not use a commutator. However, Faraday's disk generated very low voltage because of its single current path through the magnetic field. Faraday and others found that higher, more useful voltages could be produced by winding multiple turns of wire into a coil. Wire windings can conveniently produce any voltage desired by changing the number of turns, so they have been a feature of all subsequent generator designs, requiring the invention of the commutator to produce direct current.
In 1827, Hungarian Anyos Jedlik started experimenting with electromagnetic rotating devices which he called electromagnetic self-rotors. In the prototype of the single-pole electric starter, both the stationary and the revolving parts were electromagnetic. He formulated the concept of the dynamo about six years before Siemens and Wheatstone but did not patent it as he thought he was not the first to realize this. His dynamo used, instead of permanent magnets, two electromagnets opposite to each other to induce the magnetic field around the rotor.
The first dynamo based on Faraday's principles was built in 1832 by Hippolyte Pixii, a French instrument maker. It used a permanent magnet which was rotated by a crank. The spinning magnet was positioned so that its north and south poles passed by a piece of iron wrapped with wire. Pixii found that the spinning magnet produced a pulse of current in the wire each time a pole passed the coil. However, the north and south poles of the magnet induced currents in opposite directions. To convert the alternating current to DC, Pixii invented a commutator, a split metal cylinder on the shaft, with two springy metal contacts that pressed against it.
These early designs had a problem: the electric current they produced consisted of a series of "spikes" or pulses of current separated by none at all, resulting in a low average power output. Antonio Pacinotti, an Italian physics professor, solved this problem around 1860 by replacing the spinning two-pole axial coil with a multi-pole toroidal one, which he created by wrapping an iron ring with a continuous winding, connected to the commutator at many equally spaced points around the ring; the commutator being divided into many segments. This meant that some part of the coil was continually passing by the magnets, smoothing out the current.
Siemens and Wheatstone dynamo (1867)
The first practical designs for a dynamo were announced independently and simultaneously by Dr. Werner Siemens and Charles Wheatstone. On January 17, 1867, Siemens announced to the Berlin academy a "dynamo-electric machine" (first use of the term) which employed a self-powering electromagnetic armature. On the same day that this invention was announced to the Royal Society Charles Wheatstone read a paper describing a similar design with the difference that in the Siemens design the armature was in series with the rotor, but in Wheatstone's design it was in parallel. The use of electromagnets rather than permanent magnets greatly increases the power output of a dynamo and enabled high power generation for the first time. This invention led directly to the first major industrial uses of electricity. For example, in the 1870s Siemens used electromagnetic dynamos to power electric arc furnaces for the production of metals and other materials.
Gramme ring dynamo
Zénobe Gramme reinvented Pacinotti's design in 1871 when designing the first commercial power plants, which operated in Paris in the 1870s. Another advantage of Gramme's design was a better path for the magnetic flux, by filling the space occupied by the magnetic field with heavy iron cores and minimizing the air gaps between the stationary and rotating parts. The Gramme dynamo was the first machine to generate commercial quantities of power for industry. Further improvements were made on the Gramme ring, but the basic concept of a spinning endless loop of wire remains at the heart of all modern dynamos.
Charles F. Brush assembled his first dynamo in the summer of 1876 using a horse-drawn treadmill to power it. U.S. Patent #189997 "Improvement in Magneto-Electric Machines" was issued April 24, 1877. Brush started with the basic Gramme design where the wire on the sides and interior of the ring were outside the effective zone of the field and too much heat was retained. To improve upon this design, his ring armature was shaped like a disc rather than the cylinder shape of the Gramme armature. The field electromagnets were positioned on the sides of the armature disc rather than around the circumference. There were four electromagnets, two with north pole shoes and two with south pole shoes. The like poles opposed each other, one on each side of the disc armature. In 1881 one of The Brush Electric Company dynamos was reported to be; 89 inches long, 28 inches wide, and 36 inches in height, and weighs 4,800 pounds, and ran at a speed of about 700 revolutions per minute. It was believed to be the largest dynamo in the world at that time. Forty arc lights were fed by it, and it required 36 horse power.
Discovery of electric motor principles
While not originally designed for the purpose, it was discovered that a dynamo can act as an electric motor when supplied with direct current from a battery or another dynamo. At an industrial exhibition in Vienna in 1873, Gramme noticed that the shaft of his dynamo began to spin when its terminals were accidentally connected to another dynamo producing electricity. Although this wasn't the first demonstration of an electric motor, it was the first practical one. It was found that the same design features which make a dynamo efficient also make a motor efficient. The efficient Gramme design, with small magnetic air gaps and many coils of wire attached to a many-segmented commutator, also became the basis for the design of all practical DC motors.
Large dynamos producing direct current were problematic in situations where two or more dynamos are working together and one has an engine running at a lower power than the other. The dynamo with the stronger engine will tend to drive the weaker as if it were a motor, against the rotation of the weaker engine. Such reverse-driving could feed back into the driving engine of a dynamo and cause a dangerous out of control reverse-spinning condition in the lower-power dynamo. It was eventually determined that when several dynamos all feed the same power source all the dynamos must be locked into synchrony using a jackshaft interconnecting all engines and rotors to counter these imbalances.
Dynamo as commutated DC generator
After the discovery of the AC Generator and that alternating current can in fact be useful for something, the word dynamo became associated exclusively with the commutated DC electric generator, while an AC electrical generator using either slip rings or rotor magnets would become known as an alternator.
An AC electric motor using either slip rings or rotor magnets was referred to as a synchronous motor, and a commutated DC electric motor could be called either an electric motor though with the understanding that it could in principle operate as a generator.
Rotary converter development
After dynamos and motors were found to allow easy conversion back and forth between mechanical or electrical power, they were combined in devices called rotary converters, rotating machines whose purpose was not to provide mechanical power to loads but to convert one type of electric current into another, for example DC into AC. They were multi-field single-rotor devices with two or more commutators, one to provide power to one set of armature windings to turn the device, and one or more attached to other windings to produce the output current.
The rotary converter can directly convert, internally, any type of electric power into any other. This includes converting beween direct current (DC) and alternating current (AC), three phase and single phase power, 25 cycle AC and 60 cycle AC, or many different output voltages at the same time. The size and mass of the rotor was made large so that the rotor would act as a flywheel to help smooth out any sudden surges or dropouts in the applied power.
The technology of rotary converters was replaced in the early 20th century by vacuum tube circuits, which were smaller, didn't produce vibration and noise, and required less maintenance. The same conversion tasks are now performed by solid state power semiconductor devices.
Dynamos still have some uses in low power applications, particularly where low voltage DC is required, since an alternator with a semiconductor rectifier can be inefficient in these applications. Hand cranked dynamos are used in clockwork radios, lamps (LEDs), mobile phones (i.e. using USB port) and other human powered equipment to recharge batteries.
- Bottle dynamo
- Electrical generator
- Henry Brooks Adams
- Henry Wilde
- Hub dynamo
- Radioisotope thermoelectric generator
- Solar cell
- Welding sets.
- Wind turbine
- ↑ Simon, Andrew L. (1998). Made in Hungary: Hungarian contributions to universal culture. Simon Publications. pp. 207. ISBN 0966573420.
- ↑ "Ányos Jedlik biography". Hungarian Patent Office. http://www.mszh.hu/English/feltalalok/jedlik.html. Retrieved 10 May 2009.
- ↑ Berliner Berichte. January 1867.
- ↑ Proc. Royal Society. February 14, 1867.
- ↑ Jeffrey La Favre. "The Brush Dynamo". http://www.lafavre.us/brush/dynamo.htm.
- ↑ "The Brush Electric Light". Scientific American. 2 April, 1881. http://www.machine-history.com/Brush%20Electric%20Company.
|Wikimedia Commons has media related to: Dynamos|