1.of or relating to factorials
1.the product of all the integers up to and including a given integer"1, 2, 6, 24, and 120 are factorials"
Advertizing ▼
FactorialFac*to"ri*al (?), a.
1. Of or pertaining to a factory. Buchanan.
2. (Math.) Related to factorials.
FactorialFac*to"ri*al, n. (Math.) (a) pl. A name given to the factors of a continued product when the former are derivable from one and the same function F(x) by successively imparting a constant increment or decrement h to the independent variable. Thus the product F(x).F(x + h).F(x + 2h) . . . F[x + (n-1)h] is called a factorial term, and its several factors take the name of factorials. Brande & C.
(b) The product of the consecutive whole numbers from unity up to any given number; thus, 5 factorial is the product of 5 times four times three times two times one, or 120.
Advertizing ▼
definition of Wikipedia
Alternating factorial • Exponential factorial • Factorial analysis • Factorial base • Factorial code • Factorial experiment • Factorial moment • Factorial prime • Fractional factorial design • List of factorial and binomial topics
(multiplication; times), (product)[termes liés]
factorial (n.)↕
mathematical product, product[Hyper.]
factorial[Dérivé]
factorial (n.)↕
n | n! |
---|---|
0 | 1 |
1 | 1 |
2 | 2 |
3 | 6 |
4 | 24 |
5 | 120 |
6 | 720 |
7 | 5040 |
8 | 40320 |
9 | 362880 |
10 | 3628800 |
12 | 479001600 |
15 | 1307674368000 |
18 | 6402373705728000 |
20 | 2432902008176640000 |
24 | 6.20448402×10^{23} |
25 | 1.5511210043×10^{25} |
42 | 1.40500612×10^{51} |
50 | 3.0414093202×10^{64} |
70 | 1.1978571670×10^{100} |
100 | 9.3326215444×10^{157} |
450 | 1.7333687331×10^{1,000} |
1000 | 4.0238726008×10^{2,567} |
3249 | 6.4123376883×10^{10,000} |
10000 | 2.8462596809×10^{35,659} |
25206 | 1.2057034382×10^{100,000} |
100000 | 2.8242294080×10^{456,573} |
205023 | 2.5038989317×10^{1,000,004} |
1000000 | 8.2639316883×10^{5,565,708} |
1.0248383838×10^{98} | 10^{10100} |
10^{100} | 10^{9.9565705518×10101} |
In mathematics, the factorial of a non-negative integer n, denoted by n!, is the product of all positive integers less than or equal to n. For example,
The value of 0! is 1, according to the convention for an empty product.^{[1]}
The factorial operation is encountered in many different areas of mathematics, notably in combinatorics, algebra and mathematical analysis. Its most basic occurrence is the fact that there are n! ways to arrange n distinct objects into a sequence (i.e., permutations of the set of objects). This fact was known at least as early as the 12th century, to Indian scholars.^{[2]} The notation n! was introduced by Christian Kramp in 1808.^{[3]}
The definition of the factorial function can also be extended to non-integer arguments, while retaining its most important properties; this involves more advanced mathematics, notably techniques from mathematical analysis.
Contents |
The factorial function is formally defined by
or recursively defined by
Both of the above definitions incorporate the instance
in the first case by the convention that the product of no numbers at all is 1. This is convenient because:
The factorial function can also be defined for non-integer values using more advanced mathematics, detailed in the section below. This more generalized definition is used by advanced calculators and mathematical software such as Maple or Mathematica.
Although the factorial function has its roots in combinatorics, formulas involving factorials occur in many areas of mathematics.
Factorials have many applications in number theory. In particular, n! is necessarily divisible by all prime numbers up to and including n. As a consequence, n > 5 is a composite number if and only if
A stronger result is Wilson's theorem, which states that
if and only if p is prime.
Adrien-Marie Legendre found that the multiplicity of the prime p occurring in the prime factorization of n! can be expressed exactly as
This fact is based on counting the number of factors p of the integers from 1 to n. The number of multiples of p in the numbers 1 to n are given by ; however, this formula counts those numbers with two factors of p only once. Hence another factors of p must be counted too. Similarly for three, four, five factors, to infinity. The sum is finite since p^{ i} can only be less than or equal to n for finitely many values of i, and the floor function results in 0 when applied for p^{ i} > n.
The only factorial that is also a prime number is 2, but there are many primes of the form n! ± 1, called factorial primes.
All factorials greater than 1! are even, as they are all multiples of 2. Also, all factorials from 5! upwards are multiples of 10 (and hence have a trailing zero as their final digit), because they are multiples of 5 and 2.
Also note that the reciprocals of factorials produce a convergent series: (see e)
As n grows, the factorial n! increases faster than all polynomials and exponential functions (but slower than double exponential functions) in n.
Most approximations for n! are based on approximating its natural logarithm
The graph of the function f(n) = log n! is shown in the figure on the right. It looks approximately linear for all reasonable values of n, but this intuition is false. We get one of the simplest approximations for log n! by bounding the sum with an integral from above and below as follows:
which gives us the estimate
Hence log n! is Θ(n log n) (see Big O notation). This result plays a key role in the analysis of the computational complexity of sorting algorithms (see comparison sort). From the bounds on log n! deduced above we get that
It is sometimes practical to use weaker but simpler estimates. Using the above formula it is easily shown that for all n we have , and for all n ≥ 6 we have .
For large n we get a better estimate for the number n! using Stirling's approximation:
In fact, it can be proved that for all n we have
A much better approximation^{[citation needed]} for log n! was given by Srinivasa Ramanujan (Ramanujan 1988)
If efficiency is not a concern, computing factorials is trivial from an algorithmic point of view: successively multiplying a variable initialized to 1 by the integers 2 up to n (if any) will compute n!, provided the result fits in the variable. In functional languages, the recursive definition is often implemented directly to illustrate recursive functions.
The main practical difficulty in computing factorials is the size of the result. To assure that the exact result will fit for all legal values of even the smallest commonly used integral type (8-bit signed integers) would require more than 700 bits, so no reasonable specification of a factorial function using fixed-size types can avoid questions of overflow. The values 12! and 20! are the largest factorials that can be stored in, respectively, the 32-bit and 64-bit integers commonly used in personal computers. Floating-point representation of an approximated result allows going a bit further, but this also remains quite limited by possible overflow. Most calculators use scientific notation with 2-digit decimal exponents, and the largest factorial that fits is then 69!, because 69! < 10^{100} < 70!. Calculators that use 3-digit exponents can compute larger factorials, up to, for example, 253! ≈ 5.2×10^{499} on HP calculators and 449! ≈ 3.9×10^{997} on the TI-86. The calculator seen in Mac OS X, Microsoft Excel and Google Calculator, as well as the freeware Fox Calculator, can handle factorials up to 170!, which is the largest factorial whose floating-point approximation can be represented as a 64-bit IEEE 754 floating-point value. The scientific calculator in Windows XP is able to calculate factorials up to at least 100000!.
Most software applications will compute small factorials by direct multiplication or table lookup. Larger factorial values can be approximated using Stirling's formula. Wolfram Alpha can calculate exact results for the ceiling function and floor function applied to the binary, natural and common logarithm of n! for values of n up to 249999, and up to 20,000,000! for the Integers.
If very large exact factorials are needed, they can be computed using bignum arithmetic. In such computations speed may be gained^{[citation needed]} by not sequentially multiplying the numbers up to (or down from) n into a single accumulator, but by partitioning the sequence so that the products for each of the two parts are approximately of the same size, compute those products recursively and then multiply.
The asymptotically best efficiency is obtained by computing n! from its prime factorization. As documented by Peter Borwein, prime factorization allows n! to be computed in time O(n(log n log log n)^{2}), provided that a fast multiplication algorithm is used (for example, the Schönhage–Strassen algorithm).^{[4]} Peter Luschny presents source code and benchmarks for several efficient factorial algorithms, with or without the use of a prime sieve.^{[5]}
int Maths::factorial(int argument){ int value = 1; // use this value for arguments <= 1 for (int i=argument; i>1; i--) { value *= i; } return value; }
Besides nonnegative integers, the factorial function can also be defined for non-integer values, but this requires more advanced tools from mathematical analysis. One function that "fills in" the values of the factorial (but with a shift of 1 in the argument) is called the Gamma function, denoted Γ(z), defined for all complex numbers z except the non-positive integers, and given when the real part of z is positive by
Its relation to the factorials is that for any natural number n
Euler's original formula for the Gamma function was
It is worth mentioning that there is an alternative notation that was originally introduced by Gauss which is sometimes used. The Pi function, denoted Π(z) for real numbers z no less than 0, is defined by
In terms of the Gamma function it is
It truly extends the factorial in that
In addition to this, the Pi function satisfies the same recurrence as factorials do, but at every complex value z where it is defined
In fact, this is no longer a recurrence relation but a functional equation. Expressed in terms of the Gamma function this functional equation takes the form
Since the factorial is extended by the Pi function, for every complex value z where it is defined, we can write:
The values of these functions at half-integer values is therefore determined by a single one of them; one has
from which it follows that for n ∈ N,
For example,
It also follows that for n ∈ N,
For example,
The Pi function is certainly not the only way to extend factorials to a function defined at almost all complex values, and not even the only one that is analytic wherever it is defined. Nonetheless it is usually considered the most natural way to extend the values of the factorials to a complex function. For instance, the Bohr–Mollerup theorem states that the Gamma function is the only function that takes the value 1 at 1, satisfies the functional equation Γ(n + 1) = nΓ(n), is meromorphic on the complex numbers, and is log-convex on the positive real axis. A similar statement holds for the Pi function as well, using the Π(n) = nΠ(n − 1) functional equation.
However, there exist complex functions that are probably simpler in the sense of analytic function theory and which interpolate the factorial values. For example, Hadamard's 'Gamma'-function (Hadamard 1894) which, unlike the Gamma function, is an entire function.^{[6]}
Euler also developed a convergent product approximation for the non-integer factorials, which can be seen to be equivalent to the formula for the Gamma function above:
However, this formula does not provide a practical means of computing the Pi or Gamma function, as its rate of convergence is slow.
The volume of an n-dimensional hypersphere of radius R is
Representation through the Gamma-function allows evaluation of factorial of complex argument. Equilines of amplitude and phase of factorial are shown in figure. Let . Several levels of constant modulus (amplitude) and constant phase are shown. The grid covers range , with unit step. The scratched line shows the level .
Thin lines show intermediate levels of constant modulus and constant phase. At poles , phase and amplitude are not defined. Equilines are dense in vicinity of singularities along negative integer values of the argument.
For , the Taylor expansions can be used:
The first coefficients of this expansion are
approximation | ||
---|---|---|
0 | ||
1 | ||
2 | ||
3 |
where is the Euler constant and is the Riemann zeta function. Computer algebra systems such as Sage (mathematics software) can generate many terms of this expansion.
For the large values of the argument, factorial can be approximated through the integral of the digamma function, using the continued fraction representation. This approach is due to T. J. Stieltjes (1894). Writing z! = exp(P(z)) where P(z) is
Stieltjes gave a continued fraction for p(z)
The first few coefficients a_{n} are ^{[7]}
n | a_{n} |
---|---|
0 | 1 / 12 |
1 | 1 / 30 |
2 | 53 / 210 |
3 | 195 / 371 |
4 | 22999 / 22737 |
5 | 29944523 / 19733142 |
6 | 109535241009 / 48264275462 |
There is common misconception, that or for any complex z ≠ 0. Indeed, the relation through the logarithm is valid only for specific range of values of z in vicinity of the real axis, while . The larger is the real part of the argument, the smaller should be the imaginary part. However, the inverse relation, z! = exp(P(z)), is valid for the whole complex plane apart from zero. The convergence is poor in vicinity of the negative part of the real axis. (It is difficult to have good convergence of any approximation in vicinity of the singularities). While or , the 6 coefficients above are sufficient for the evaluation of the factorial with the complex<double> precision. For higher precision more coefficients can be computed by a rational QD-scheme (H. Rutishauser's QD algorithm).^{[8]}
The relation n ! = (n − 1)! × n allows one to compute the factorial for an integer given the factorial for a smaller integer. The relation can be inverted so that one can compute the factorial for an integer given the factorial for a larger integer:
Note, however, that this recursion does not permit us to compute the factorial of a negative integer; use of the formula to compute (−1)! would require a division by zero, and thus blocks us from computing a factorial value for every negative integer. (Similarly, the Gamma function is not defined for non-positive integers, though it is defined for all other complex numbers.)
There are several other integer sequences similar to the factorial that are used in mathematics:
The primorial (sequence A002110 in OEIS) is similar to the factorial, but with the product taken only over the prime numbers.
The product of all odd integers up to some odd positive integer n is often called the double factorial of n (even though it only involves about half the factors of the ordinary factorial, and its value is therefore closer to the square root of the factorial). It is denoted by n!!.
For an odd positive integer n = 2k - 1, k ≥ 1, it is
For example, 9!! = 1 × 3 × 5 × 7 × 9 = 945. This notation creates a notational ambiguity with the composition of the factorial function with itself (which for n > 2 gives much larger numbers than the double factorial); this may be justified by the fact that composition arises very seldom in practice, and could be denoted by (n!)! to circumvent the ambiguity. The double factorial notation is not essential; it can be expressed in terms of the ordinary factorial by
since the denominator equals and cancels the unwanted even factors from the numerator. The introduction of the double factorial is motivated by the fact that it occurs rather frequently in combinatorial and other settings, for instance
Sometimes n!! is defined for non-negative even numbers as well. One choice is a definition similar to the one for odd values
For example, with this definition, 8!! = 2 × 4 × 6 × 8 = 384. However, note that this definition does not match the expression above, of the double factorial in terms of the ordinary factorial, and is also inconsistent with the extension of the definition of to complex numbers that is achieved via the Gamma function as indicated below. Also, for even numbers, the double factorial notation is hardly shorter than expressing the same value using ordinary factorials. For combinatorial interpretations (the value gives, for instance, the size of the hyperoctahedral group), the latter expression can be more informative (because the factor 2^{n} is the order of the kernel of a projection to the symmetric group). Even though the formulas for the odd and even double factorials can be easily combined into
the only known interpretation for the sequence of all these numbers (sequence A006882 in OEIS) is somewhat artificial: the number of down-up permutations of a set of n + 1 elements for which the entries in the even positions are increasing.
The sequence of double factorials for n = 1, 3, 5, 7, ... (sequence A001147 in OEIS) starts as
Some identities involving double factorials are:
Disregarding the above definition of n!! for even values of n, the double factorial for odd integers can be extended to most real and complex numbers z by noting that when z is a positive odd integer then
The expressions obtained by taking one of the above formulas for and and expressing the occurring factorials in terms of the gamma function can both be seen (using the multiplication theorem) to be equivalent to the one given here.
The expression found for z!! is defined for all complex numbers except the negative even numbers. Using it as the definition, the volume of an n-dimensional hypersphere of radius R can be expressed as
A common related notation is to use multiple exclamation points to denote a multifactorial, the product of integers in steps of two (), three (), or more. The double factorial is the most commonly used variant, but one can similarly define the triple factorial () and so on. One can define the k-th factorial, denoted by , recursively for non-negative integers as
though see the alternative definition below.
Some mathematicians have suggested an alternative notation of for the double factorial and similarly for other multifactorials, but this has not come into general use.
With the above definition,
In the same way that is not defined for negative integers, and is not defined for negative even integers, is not defined for negative integers evenly divisible by .
Alternatively, the multifactorial z!^{(k)} can be extended to most real and complex numbers z by noting that when z is one more than a positive multiple of k then
This last expression is defined much more broadly than the original; with this definition, z!^{(k)} is defined for all complex numbers except the negative real numbers evenly divisible by k. This definition is consistent with the earlier definition only for those integers z satisfying z ≡ 1 mod k.
In addition to extending z!^{(k)} to most complex numbers z, this definition has the feature of working for all positive real values of k. Furthermore, when k = 1, this definition is mathematically equivalent to the Π(z) function, described above. Also, when k = 2, this definition is mathematically equivalent to the alternative extension of the double factorial, described above.
The so-called quadruple factorial, however, is not the multifactorial n!^{(4)}; it is a much larger number given by (2n)!/n!, starting as
It is also equal to
Neil Sloane and Simon Plouffe defined a superfactorial in The Encyclopedia of Integer Sequences (Academic Press, 1995) to be the product of the first factorials. So the superfactorial of 4 is
In general
Equivalently, the superfactorial is given by the formula
which is the determinant of a Vandermonde matrix.
The sequence of superfactorials starts (from ) as
Clifford Pickover in his 1995 book Keys to Infinity used a new notation, n$, to define the superfactorial
or as,
where the ^{(4)} notation denotes the hyper4 operator, or using Knuth's up-arrow notation,
This sequence of superfactorials starts:
Here, as is usual for compound exponentiation, the grouping is understood to be from right to left:
Occasionally the hyperfactorial of n is considered. It is written as H(n) and defined by
For n = 1, 2, 3, 4, ... the values H(n) are 1, 4, 108, 27648,... (sequence A002109 in OEIS).
The asymptotic growth rate is
where A = 1.2824... is the Glaisher–Kinkelin constant.^{[9]} H(14) = 1.8474...×10^{99} is already almost equal to a googol, and H(15) = 8.0896...×10^{116} is almost of the same magnitude as the Shannon number, the theoretical number of possible chess games. Compared to the Pickover definition of the superfactorial, the hyperfactorial grows relatively slowly.
The hyperfactorial function can be generalized to complex numbers in a similar way as the factorial function. The resulting function is called the K-function.
sensagent's content
Dictionary and translator for handheld
New : sensagent is now available on your handheld
Advertising ▼
Webmaster Solution
Alexandria
A windows (pop-into) of information (full-content of Sensagent) triggered by double-clicking any word on your webpage. Give contextual explanation and translation from your sites !
SensagentBox
With a SensagentBox, visitors to your site can access reliable information on over 5 million pages provided by Sensagent.com. Choose the design that fits your site.
Business solution
Improve your site content
Add new content to your site from Sensagent by XML.
Crawl products or adds
Get XML access to reach the best products.
Index images and define metadata
Get XML access to fix the meaning of your metadata.
Please, email us to describe your idea.
Lettris
Lettris is a curious tetris-clone game where all the bricks have the same square shape but different content. Each square carries a letter. To make squares disappear and save space for other squares you have to assemble English words (left, right, up, down) from the falling squares.
boggle
Boggle gives you 3 minutes to find as many words (3 letters or more) as you can in a grid of 16 letters. You can also try the grid of 16 letters. Letters must be adjacent and longer words score better. See if you can get into the grid Hall of Fame !
English dictionary
Main references
Most English definitions are provided by WordNet .
English thesaurus is mainly derived from The Integral Dictionary (TID).
English Encyclopedia is licensed by Wikipedia (GNU).
Copyrights
The wordgames anagrams, crossword, Lettris and Boggle are provided by Memodata.
The web service Alexandria is granted from Memodata for the Ebay search.
The SensagentBox are offered by sensAgent.
Translation
Change the target language to find translations.
Tips: browse the semantic fields (see From ideas to words) in two languages to learn more.
last searches on the dictionary :
computed in 0.406s
Advertising ▼