Dictionary and translator for handheld
New : sensagent is now available on your handheld
A windows (pop-into) of information (full-content of Sensagent) triggered by double-clicking any word on your webpage. Give contextual explanation and translation from your sites !
With a SensagentBox, visitors to your site can access reliable information on over 5 million pages provided by Sensagent.com. Choose the design that fits your site.
Improve your site content
Add new content to your site from Sensagent by XML.
Crawl products or adds
Get XML access to reach the best products.
Index images and define metadata
Get XML access to fix the meaning of your metadata.
Please, email us to describe your idea.
Lettris is a curious tetris-clone game where all the bricks have the same square shape but different content. Each square carries a letter. To make squares disappear and save space for other squares you have to assemble English words (left, right, up, down) from the falling squares.
Boggle gives you 3 minutes to find as many words (3 letters or more) as you can in a grid of 16 letters. You can also try the grid of 16 letters. Letters must be adjacent and longer words score better. See if you can get into the grid Hall of Fame !
Change the target language to find translations.
Tips: browse the semantic fields (see From ideas to words) in two languages to learn more.
1.a petroleum product used for fuel
substance liquide (fr)[Classe...]
combustible liquide (fr)[Classe]
carburant à base de pétrole (fr)[Classe]
Descripteurs EUROVOC (fr)[Thème]
burning, combustion, ignition, inflammation, kindling - fuel - fuel - fire, fuel - anele, anoint, embrocate, inunct, oil - oil - oiler, oil tanker, oil-tanker, tanker, tank ship - oiler, oil well - oiler - oily[Dérivé]
fuel oil (n.)
fuel oil (n.)
Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
The American Society for Testing and Materials (ASTM) has published specifications for six grades of fuel oil, numbered 1 to 6. This classification system was originally based on early refining and combustion engineering practices and nomenclature. Some specifications have changed over the years to reflect new refining practices and refinery by-products. Other organizations have published modified versions of the original six fuel specifications to assist operators of older equipment find appropriate fuels from current refinery products.
Although the following trends generally hold true, different organizations may have different numerical specifications for the six fuel grades. The boiling point and carbon chain length of the fuel increases with fuel oil number. Viscosity also increases with number, and the heaviest oil has to be heated to get it to flow. Price usually decreases as the fuel number increases.
Number 1 fuel oil is a volatile distillate oil intended for vaporizing pot-type burners. It is the kerosene refinery cut that boils off right after the heavy naphtha cut used for gasoline. Older names include coal oil, stove oil and range oil.
Number 2 fuel oil is a distillate home heating oil. Trucks and some cars use similar diesel fuel with a cetane number limit describing the ignition quality of the fuel. Both are typically obtained from the light gas oil cut. Gas oil refers to the original use of this fraction in the late 19th and early 20th centuries - the gas oil cut was used as an enriching agent for carburetted water gas manufacture.
Number 3 fuel oil was a distillate oil for burners requiring low-viscosity fuel. ASTM merged this grade into the number 2 specification, and the term has been rarely used since the mid-20th century.
Number 5 fuel oil is a residual-type industrial heating oil requiring preheating to 170 – 220 °F (77 – 104 °C) for proper atomization at the burners. This fuel is sometimes known as Bunker B. It may be obtained from the heavy gas oil cut, or it may be a blend of residual oil with enough number 2 oil to adjust viscosity until it can be pumped without preheating.
Number 6 fuel oil is a high-viscosity residual oil requiring preheating to 220 – 260 °F (104 – 127 °C). Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. This fuel may be known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.
Mazut is a residual fuel oil often derived from Russian petroleum sources and is either blended with lighter petroleum fractions or burned directly in specialized boilers and furnaces. It is also used as a petrochemical feedstock.
Small molecules like those in propane gas, naphtha, gasoline for cars, and jet fuel have relatively low boiling points, and they are removed at the start of the fractional distillation process. Heavier petroleum products like diesel and lubricating oil are much less volatile and distill out more slowly, while bunker oil is literally the bottom of the barrel; the only things more dense than bunker fuel are carbon black feedstock and bituminous residue which is used for paving roads (asphalt) and sealing roofs.
Bunker fuel is technically any type of fuel oil used aboard ships. It gets its name from the containers on ships and in ports that it is stored in; in the days of steam they were coal bunkers but now they are bunker fuel tanks. The Australian Customs and the Australian Tax Office define a bunker fuel as the fuel that powers the engine of a ship or aircraft. Bunker A is No. 2 fuel oil, bunker B is No. 4 or No. 5 and bunker C is No. 6. Since No. 6 is the most common, "bunker fuel" is often used as a synonym for No. 6. No. 5 fuel oil is also called navy special fuel oil or just navy special; No. 5 or 6 are also called furnace fuel oil (FFO); the high viscosity requires heating, usually by a recirculated low pressure steam system, before the oil can be pumped from a bunker tank. In the context of shipping, the labeling of bunkers as previously described is rarely used in modern practice.
Since the 1980s the International Organization for Standardization (ISO) has been the accepted standard for marine fuels (bunkers). The standard is listed under number 8217, with recent updates in 2005 and 2010. They have broken it down to Residual and Distillate fuels. The most common residual fuels in the shipping industry are RMG and RMK. The differences between the two are mainly the density and viscosity, with RMG generally being delivered at 380 centistokes or less, and RMK at 700 centistokes or less. Ships with more advanced engines can process heavier, more viscous, and thus cheaper, fuel. Governing bodies (i.e. California, European Union) around the world are starting to limit the maximum sulfur of fuels burned in their ports to limit pollution. This is where Marine Distillate Fuels come into play. They have similar properties to Diesel #2 which is used as road Diesel around the world. The most common grades used in shipping are DMA and DMB.
||This section needs attention from an expert on the subject. (September 2008)|
|Table of fuel oils|
|No. 1 fuel oil||No. 1 distillate||No. 1 diesel fuel||Distillate||9-16|
|No. 2 fuel oil||No. 2 distillate||No. 2 diesel fuel||Distillate||10-20|
|No. 3 fuel oil||No. 3 distillate||No. 3 diesel fuel||Distillate|
|No. 4 fuel oil||No. 4 distillate||No. 4 residual fuel oil||Distillate/Residual||12-70|
|No. 5 fuel oil||No. 5 residual fuel oil||Heavy fuel oil||Residual||12-70|
|No. 6 fuel oil||No. 6 residual fuel oil||Heavy fuel oil||Residual||20-70|
Oil has many uses; it heats homes and businesses and fuels trucks, ships and some cars. A small amount of electricity is produced by diesel, but it is more polluting and more expensive than natural gas. It is often used as a backup fuel for peaking power plants in case the supply of natural gas is interrupted or as the main fuel for small electrical generators. In Europe the use of diesel is generally restricted to cars (about 40%), SUVs (about 90%), and trucks and buses (virtually all). The market for home heating using fuel oil, called heating oil, has decreased due to the widespread penetration of natural gas. However, it is very common in some areas, such as the Northeastern United States.
Residual fuel oil is less useful because it is so viscous that it has to be heated with a special heating system before use and it contains relatively high amounts of pollutants, particularly sulfur, which forms sulfur dioxide upon combustion. However, its undesirable properties make it very cheap. In fact, it is the cheapest liquid fuel available. Since it requires heating before use, residual fuel oil cannot be used in road vehicles, boats or small ships, as the heating equipment takes up valuable space and makes the vehicle heavier. Heating the oil is also a delicate procedure, which is inappropriate to do on small, fast moving vehicles. However, power plants and large ships are able to use residual fuel oil.
Residual fuel oil was used more frequently in the past. It powered boilers, railroad steam locomotives and steamships. Locomotives now use diesel; steamships are not as common as they were previously due to their higher operating costs (most LNG carriers use steam plants, as "boil-off" gas emitted from the cargo can be used as a fuel source); and most boilers now use heating oil or natural gas. However, some industrial boilers still use it and so do a few old buildings, including in New York City. The city estimates that the 1% of its buildings that burn fuel oils No. 4 and No. 6 are responsible for 86% of the soot pollution generated by all buildings in the city. New York has made the phase out of these fuel grades part of its environmental plan, PlaNYC, because of concerns for the health effects caused by fine particulates.
Residual fuel's use in electricity generation has also decreased. In 1973, residual fuel oil produced 16.8% of the electricity in the United States. By 1983, it had fallen to 6.2%, and as of 2005[update], electricity production from all forms of petroleum, including diesel and residual fuel, is only 3% of total production. The decline is the result of price competition with natural gas and environmental restrictions on emissions. For power plants, the costs of heating the oil, extra pollution control and additional maintenance required after burning it often outweigh the low cost of the fuel. Burning fuel oil, particularly residual fuel oil, also produces much darker smoke and uniformly higher Carbon Dioxide emissions than natural gas, which affects the community's perception.
Heavy fuel oils continue to be used in the boiler "lighting up" facility in many coal-fired power plants. Although on an enormous scale, this use is analogous to lighting kindling to start a fire; without performing this simple function it is difficult to begin the large-scale combustion process.
The chief drawback to residual fuel oil is its high initial viscosity, particularly in the case of No. 6 oil, which requires a correctly engineered system for storage, pumping, and burning. Though it is still usually lighter than water (with a specific gravity usually ranging from 0.95 to 1.03) it is much heavier and more viscous than No. 2 oil, kerosene, or gasoline. No. 6 oil must, in fact, be stored at around 100 °F (38 °C) heated to 150 °F (66 °C)–250 °F (121 °C) before it can be easily pumped, and in cooler temperatures it can congeal into a tarry semisolid. The flash point of most blends of No. 6 oil is, incidentally, about 150 °F (66 °C). Attempting to pump high-viscosity oil at low temperatures was a frequent cause of damage to fuel lines, furnaces, and related equipment which were often designed with lighter fuels in mind.
(For comparison, BS2869 Class G Heavy Fuel Oil behaves in similar fashion, requiring storage at 104 °F (40 °C), pumping at around 122 °F (50 °C) and finalising for burning at around 194 °F (90 °C) / 248 °F (120 °C).)
Most of the facilities which historically burned No. 6 or other residual oils were industrial plants and similar facilities constructed in the early or mid 20th century, or which had switched from coal to oil fuel during the same time period. In either case, residual oil was seen as a good prospect because it was cheap and readily available, even though it provided less energy per volume-unit than lighter fuels. Most of these facilities have subsequently been closed and demolished, or have replaced their fuel supplies with a simpler one such as gas or No. 2 oil. The high sulfur content of No. 6 oil—up to 3% by weight in some extreme cases—had a corrosive effect on many heating systems (which were usually designed without adequate corrosion protection in mind), shortening their lifespans and increasing the polluting effects. This was particularly the case in furnaces that were regularly shut down and allowed to go cold; the internal condensation produced sulfuric acid.
Environmental cleanups at such facilities are frequently complicated by the use of asbestos insulation on the fuel feed lines. No. 6 oil is very persistent, and does not degrade rapidly. Its viscosity and stickiness also make remediation of underground contamination very difficult, since it reduces the effectiveness of methods such as air stripping.
When released into water, such as a river or ocean, residual oil tends to break up into patches or tarballs—mixtures of oil and particulate matter such as silt and floating organic matter- rather than form a single slick. An average of about 5-10% of the material will evaporate within hours of the release, primarily the lighter hydrocarbon fractions. The remainder will then often sink to the bottom of the water column.
In the maritime field another type of classification is used for fuel oils:
Marine diesel oil contains some heavy fuel oil, unlike regular diesels. Also, marine fuel oils sometimes contain waste products such as used motor oil.
CCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels. Despite this marine fuels are still quoted on the international bunker markets with their maximum viscosity (which is set by the ISO 8217 standard - see below) due to the fact that marine engines are designed to use different viscosities of fuel. The unit of viscosity used is the Centistoke and the fuels most frequently quoted are listed below in order of cost, the least expensive first-
The density is also an important parameter for fuel oils since marine fuels are purified before use to remove water and dirt from the oil. Since the purifiers use centrifugal force, the oil must have a density which is sufficiently different from water. Older purifiers had a maximum of 991 kg/m3; with modern purifiers it is also possible to purify oil with a density of 1010 kg/m3.
The first British standard for fuel oil came in 1982. The latest standard is ISO 8217 from 2005. The ISO standard describe four qualities of distillate fuels and 10 qualities of residual fuels. Over the years the standards have become stricter on environmentally important parameters such as sulfur content. The latest standard also banned the adding of used lubricating oil (ULO).
Some parameters of marine fuel oils according to ISO 8217 (3. ed 2005):
|Marine Distillate Fuels|
|Density at 15°C||kg/m3||Max||-||890.0||900.0||920.0|
|Viscosity at 40°C||mm²/s||Max||5.5||6.0||11.0||14.0|
|Viscosity at 40°C||mm²/s||Min||1.4||1.5||-||-|
|Aluminium + Silicon2||mg/kg||Max||-||-||-||25|
|Pour point, Summer||°C||Max||-||0||6||6|
|Pour point, Winter||°C||Max||-||-6||0||0|
|Calculated Cetane Index||Min||45||40||35||-|
|Marine Residual Fuels|
|Parameter||Unit||Limit||RMA 30||RMB 30||RMD 80||RME 180||RMF 180||RMG 380||RMH 380||RMK 380||RMH 700||RMK 700|
|Density at 15°C||kg/m3||Max||960.0||975.0||980.0||991.0||991.0||991.0||991.0||1010.0||991.0||1010.0|
|Viscosity at 50°C||mm²/s||Max||30.0||30.0||80.0||180.0||180.0||380.0||380.0||380.0||700.0||700.0|
|Aluminium + Silicon2||mg/kg||Max||80||80||80||80||80||80||80||80||80||80|
|Pour point, Summer||°C||Max||6||24||30||30||30||30||30||30||30||30|
|Pour point, Winter||°C||Max||0||24||30||30||30||30||30||30||30||30|
Fuel oil is transported worldwide by fleets of oil tankers making deliveries to suitably sized strategic ports such as Houston, Singapore, Fujairah, Balboa, Cristobal, Gibraltar and Rotterdam. Where a convenient seaport does not exist, inland transport may be achieved with the use of barges. The lighter fuel oils can also be transported through pipelines. The major physical supply chains of Europe are along the Rhine.