Quadrilateral
Six different types of quadrilaterals
Edges and vertices	4
Schläfli symbol	{4} (for square)
Area	various methods; see below
Internal angle (degrees)	90° (for square)

In Euclidean plane geometry, a quadrilateral is a polygon with four sides (or edges) and four vertices or corners. Sometimes, the term quadrangle is used, by analogy with triangle, and sometimes tetragon for consistency with pentagon (5-sided), hexagon (6-sided) and so on.

The origin of the word "quadrilateral" is the two Latin words quadri, a variant of four, and latus, meaning "side."

Quadrilaterals are simple (not self-intersecting) or complex (self-intersecting), also called crossed. Simple quadrilaterals are either convex or concave.

The interior angles of a simple quadrilateral ABCD add up to 360 degrees of arc, that is

This is a special case of the n-gon interior angle sum formula (n − 2) × 180°. In a crossed quadrilateral, the interior angles on either side of the crossing add up to 720°.^[1]

All convex quadrilaterals tile the plane by repeated rotation around the midpoints of their edges.

Contents 1 Convex quadrilaterals – parallelograms 2 Convex quadrilaterals – other 3 More quadrilaterals 4 Special line segments 5 Notations in metric formulas 6 Area of a convex quadrilateral 6.1 Using trigonometry 6.2 Non-trigonometric formulas 6.3 Using vectors 6.4 Area inequalities 7 Diagonals 8 Bimedians 9 Trigonometric identities 10 Maximum and minimum properties 11 Remarkable points and lines in a convex quadrilateral 12 Other properties of convex quadrilaterals 13 Taxonomy 14 See also 15 References 16 External links

  Convex quadrilaterals – parallelograms

A parallelogram is a quadrilateral with two pairs of parallel sides. Equivalent conditions are that opposite sides are of equal length; that opposite angles are equal; or that the diagonals bisect each other. Parallelograms also include the square, rectangle, rhombus and rhomboid.

• Rhombus or rhomb: all four sides are of equal length. Equivalent conditions are that opposite sides are parallel and opposite angles are equal, or that the diagonals perpendicularly bisect each other. An informal description is "a pushed-over square" (including a square).
• Rhomboid: a parallelogram in which adjacent sides are of unequal lengths and angles are oblique (not right angles). Informally: "a pushed-over rectangle with no right angles."
• Rectangle: all four angles are right angles. An equivalent condition is that the diagonals bisect each other and are equal in length. Informally: "a box or oblong" (including a square).
• Square (regular quadrilateral): all four sides are of equal length (equilateral), and all four angles are right angles. An equivalent condition is that opposite sides are parallel (a square is a parallelogram), that the diagonals perpendicularly bisect each other, and are of equal length. A quadrilateral is a square if and only if it is both a rhombus and a rectangle (four equal sides and four equal angles).
• Oblong: a term sometimes used to denote a rectangle which has unequal adjacent sides (i.e. a rectangle that is not a square).

  Convex quadrilaterals – other

• Kite: two pairs of adjacent sides are of equal length. This implies that one diagonal divides the kite into congruent triangles, and so the angles between the two pairs of equal sides are equal in measure. It also implies that the diagonals are perpendicular.
• Trapezoid (North American English) or Trapezium (British English): at least one pair of opposite sides are parallel.
• Trapezium (NAm.): no sides are parallel. (In British English this would be called an irregular quadrilateral, and was once called a trapezoid.)
• Isosceles trapezoid (NAm.) or isosceles trapezium (Brit.): one pair of opposite sides are parallel and the other two sides are of equal length. This implies that the base angles are equal in measure, and that the diagonals are of equal length. An alternative definition is a quadrilateral with an axis of symmetry bisecting one pair of opposite sides.
• Tangential trapezoid: a trapezoid where the four sides are tangents to an inscribed circle.
• Tangential quadrilateral: the four sides are tangents to an inscribed circle. A convex quadrilateral is tangential if and only if opposite sides have equal sums.
• Cyclic quadrilateral: the four vertices lie on a circumscribed circle. A convex quadrilateral is cyclic if and only if opposite angles sum to 180°.
• Bicentric quadrilateral: it is both tangential and cyclic.
• Orthodiagonal quadrilateral: the diagonals cross at right angles.
• Equidiagonal quadrilateral: the diagonals are of equal length.
• Ex-tangential quadrilateral: the four extensions of the sides are tangent to an excircle.

  More quadrilaterals

• An equilic quadrilateral has two opposite equal sides that, when extended, meet at 60°.
• A Watt quadrilateral is a quadrilateral with a pair of opposite sides of equal length.^[2]
• A geometric chevron (dart or arrowhead) is a concave quadrilateral with bilateral symmetry like a kite, but one interior angle is reflex.
• A self-intersecting quadrilateral is called variously a cross-quadrilateral, crossed quadrilateral, butterfly quadrilateral or bow-tie quadrilateral. A special case of crossed quadrilaterals are the antiparallelograms, crossed quadrilaterals in which (like a parallelogram) each pair of nonadjacent sides has equal length. The diagonals of a crossed or concave quadrilateral do not intersect inside the shape.
• A non-planar quadrilateral is called a skew quadrilateral. Formulas to compute its dihedral angles from the edge lengths and the angle between two adjacent edges were derived for work on the properties of molecules such as cyclobutane that contain a "puckered" ring of four atoms.^[3] See skew polygon for more. Historically the term gauche quadrilateral was also used to mean a skew quadrilateral.^[4]

  Special line segments

The two diagonals of a convex quadrilateral are the line segments that connect opposite vertices.

The two bimedians of a convex quadrilateral are the line segments that connect the midpoints of opposite sides.^[5] They intersect at the "vertex centroid" of the quadrilateral (see Remarkable points below).

The four maltitudes of a convex quadrilateral are the perpendiculars to a side through the midpoint of the opposite side.^[6]

  Notations in metric formulas

In the metric formulas below, the following notations are used. A convex quadrilateral ABCD has the sides a = AB, b = BC, c = CD, and d = DA. The diagonals are p = AC and q = BD, and the angle between them is θ. The semiperimeter s is defined as

.

  Area of a convex quadrilateral

There are various general formulas for the area K of a convex quadrilateral.

  Using trigonometry

The area can be expressed in trigonometric terms as

where the lengths of the diagonals are p and q and the angle between them is θ.^[7] In the case of an orthodiagonal quadrilateral (e.g. rhombus, square, and kite), this formula reduces to since θ is 90°.

Bretschneider's formula^[8] expresses the area in terms of the sides and two opposite angles:

where the sides in sequence are a, b, c, d, where s is the semiperimeter, and A and C are two (in fact, any two) opposite angles. This reduces to Brahmagupta's formula for the area of a cyclic quadrilateral when A+C = 180°.

Another area formula in terms of the sides and angles, with angle C being between sides b and c, and A being between sides a and d, is

In the case of a cyclic quadrilateral, the latter formula becomes

In a parallelogram, where both pairs of opposite sides and angles are equal, this formula reduces to

Alternatively, we can write the area in terms of the sides and the intersection angle θ of the diagonals, so long as this angle is not 90°:^[9]

In the case of a parallelogram, the latter formula becomes

  Non-trigonometric formulas

The following two formulas expresses the area in terms of the sides and diagonals p and q as^[10]

where s is the semiperimeter, and^[11]

The first reduces to Brahmagupta's formula in the cyclic quadrilateral case, since then pq = ac + bd.

The area can also be expressed in terms of the bimedians m and n, and the diagonals p and q as^[12]

and^[13]

  Using vectors

The area of a quadrilateral ABCD can be calculated using vectors. Let vectors AC and BD form the diagonals from A to C and from B to D. The area of the quadrilateral is then

which is the magnitude of the cross product of vectors AC and BD. In two-dimensional Euclidean space, expressing vector AC as a free vector in Cartesian space equal to (x₁,y₁) and BD as (x₂,y₂), this can be rewritten as:

  Area inequalities

If a convex quadrilateral has the consecutive sides a, b, c, d and the diagonals p, q, then its area K satisfy^[14]

with equality only for a rectangle.

with equality only for a square.

with equality only if the diagonals are perpendicular and equal.

From Bretschneider's formula it directly follows that the area of a quadrilateral satisfy

with equality if and only if the quadrilateral is cyclic or degenerate such that one side is equal to the sum of the other three (it has collapsed into a line segment, so the area is zero).

The area of any quadrilateral also satisfies the inequality^[15]

  Diagonals

The length of the diagonals in a convex quadrilateral ABCD can be calculated using the law of cosines. Thus

and

Other, more symmetric formulas for the length of the diagonals, are^[16]

and

In any convex quadrilateral ABCD, the sum of the squares of the four sides is equal to the sum of the squares of the two diagonals plus four times the square of the line segment connecting the midpoints of the diagonals. Thus

where x is the distance between the midpoints of the diagonals.^[17]:p.126 This is sometimes known as Euler's quadrilateral theorem and is a generalization of the parallelogram law.

Euler also generalized Ptolemy's theorem, which is an equality in a cyclic quadrilateral, into an inequality for a convex quadrilateral. It states that

where there is equality if and only if the quadrilateral is cyclic.^{[17]:p.128-129} This is often called Ptolemy's inequality.

The German mathematician Carl Anton Bretschneider derived in 1842 the following generalization of Ptolemy's theorem, regarding the product of the diagonals in a convex quadrilateral^[18]

This relation can be considered to be a law of cosines for a quadrilateral. In a cyclic quadrilateral, where A + C = 180°, it reduces to pq = ac + bd. Since cos (A + C) ≥ -1, it also gives a proof of Ptolemy's inequality.

In a convex quadrilateral ABCD with sides a = AB, b = BC, c = CD, d = DA, and where the diagonals intersect at E,

where e = AE, f = BE, g = CE, and h = DE.^[19]

If X and Y are the feet of the normals from B and D to the diagonal AC = p in a convex quadrilateral ABCD with sides a = AB, b = BC, c = CD, d = DA, then^[20]:p.14

  Bimedians

The midpoints of the sides of a quadrilateral are the vertices of a parallelogram called the Varignon parallelogram. The sides in this parallelogram are half the lengths of the diagonals of the original quadrilateral, the area of the Varignon parallelogram equals half the area of the original quadrilateral, and the perimeter of the Varignon parallelogram equals the sum of the diagonals of the original quadrilateral. The diagonals of the Varignon parallelogram are the bimedians of the original quadrilateral.

The two bimedians in a quadrilateral and the line segment joining the midpoints of the diagonals in that quadrilateral are concurrent and are all bisected by their point of intersection.^[17]:p.125

In a convex quadrilateral with sides a, b, c and d, the length of the bimedian that connects the midpoints of the sides a and c is

where p and q are the length of the diagonals.^[21] The length of the bimedian that connects the midpoints of the sides b and d is

Hence^[17]:p.126

This is also a corollary to the parallelogram law applied in the Varignon parallelogram.

The length of the bimedians can also be expressed in terms of two opposite sides and the distance x between the midpoints of the diagonals. This is possible when using Euler's quadrilateral theorem in the above formulas. Whence^[13]

and

Note that the two opposite sides in these formulas are not the two that the bimedian connects.

In a convex quadrilateral, there are the following dual connection between the bimedians and the diagonals:^[20]

• The two bimedians have equal length if and only if the two diagonals are perpendicular
• The two bimedians are perpendicular if and only if the two diagonals have equal length

  Trigonometric identities

The four angles of a simple quadrilateral ABCD satisfies the following identities:^[22]

and

Also,^[23]

In the last two formulas, no angle is allowed to be a right angle, since then the tangent functions are not defined.

  Maximum and minimum properties

Among all quadrilaterals with a given perimeter, the one with the largest area is the square. This is called the isoperimetric theorem for quadrilaterals. It is a direct consequence of the area inequality^[15]:p.114

where K is the area of a convex quadrilateral with perimeter L. Equality holds if and only if the quadrilateral is a square. The dual theorem states that of all quadrilaterals with a given area, the square has the shortest perimeter.

The quadrilateral with given side lengths that has the maximum area is the cyclic quadrilateral.^[24]

Of all convex quadrilaterals with given diagonals, the orthodiagonal quadrilateral has the largest area.^[15]:p.119 This is a direct consequence of the fact that the area of a convex quadrilateral satisfies

where θ is the angle between the diagonals p and q. Equality holds if and only if θ = 90°.

If P is an interior point in a convex quadrilateral ABCD, then

From this inequality it follows that the point inside a quadrilateral that minimizes the sum of distances to the vertices is the intersection of the diagonals. Hence that point is the Fermat point of a convex quadrilateral.^[15]:p.120

  Remarkable points and lines in a convex quadrilateral

The centre of a quadrilateral can be defined in several different ways. The "vertex centroid" comes from considering the quadrilateral as being empty but having equal masses at its vertices. The "side centroid" comes from considering the sides to have constant mass per unit length. The usual centre, called just centroid (centre of area) comes from considering the surface of the quadrilateral as having constant density. These three points are in general not all the same point.^[25]

The "vertex centroid" is the intersection of the two bimedians.^[26] As with any polygon, the x and y coordinates of the vertex centroid are the arithmetic means of the x and y coordinates of the vertices.

The "area centroid" of quadrilateral ABCD can be constructed in the following way. Let G_a, G_b, G_c, G_d be the centroids of triangles BCD, ACD, ABD, ABC respectively. Then the "area centroid" is the intersection of the lines G_aG_c and G_bG_d.^[27]

In a general convex quadrilateral ABCD, there are no natural analogies to the circumcenter and orthocenter of a triangle. But two such points can be constructed in the following way. Let O_a, O_b, O_c, O_d be the circumcenters of triangles BCD, ACD, ABD, ABC respectively; and denote by H_a, H_b, H_c, H_d the orthocenters in the same triangles. Then the intersection of the lines O_aO_c and O_bO_d is called the quasicircumcenter; and the intersection of the lines H_aH_c and H_bH_d is called the quasiorthocenter of the convex quadrilateral.^[27] These points can be used to define an Euler line of a quadrilateral. In a convex quadrilateral, the quasiorthocenter H, the "area centroid" G, and the quasicircumcenter O are collinear in this order, and HG = 2GO.^[27]

There can also be defined a quasinine-point center E as the intersection of the lines E_aE_c and E_bE_d, where E_a, E_b, E_c, E_d are the nine-point centers of triangles BCD, ACD, ABD, ABC respectively. Then E is the midpoint of OH.^[27]

Another remarkable line in a convex quadrilateral is the Newton line.

  Other properties of convex quadrilaterals

• Let exterior squares be drawn on all sides of a quadrilateral. The segments connecting the centers of opposite squares are (a) equal in length, and (b) perpendicular. Thus these centers are the vertices of an orthodiagonal quadrilateral. This is called Van Aubel's theorem.
• The internal angle bisectors of a convex quadrilateral either form a cyclic quadrilateral^[17]:p.127 or they are concurrent, in which case the quadrilateral is a tangential quadrilateral.
• For any simple quadrilateral with given edge lengths, there is a cyclic quadrilateral with the same edge lengths.^[24]

  Taxonomy

A taxonomy of quadrilaterals is illustrated by the following graph. Lower forms are special cases of higher forms. Note that "trapezium" here is referring to the British definition (the North American equivalent is a trapezoid), and "kite" excludes the concave kite (arrowhead or dart). Inclusive definitions are used throughout.

  See also

Bicentric quadrilateral Complete quadrangle Cyclic quadrilateral Equidiagonal quadrilateral Ex-tangential quadrilateral            Isosceles trapezoid Kite Orthodiagonal quadrilateral

Parallelogram Rectangle Rhombus Square Tangential quadrilateral Tangential trapezoid Trapezoid

  References

  External links

Wikimedia Commons has media related to: Tetragons

• Weisstein, Eric W., "Quadrilateral" from MathWorld.
• Compendium Geometry Analytic Geometry of Quadrilaterals
• Quadrilaterals Formed by Perpendicular Bisectors, Projective Collinearity and Interactive Classification of Quadrilaterals from cut-the-knot
• Definitions and examples of quadrilaterals and Definition and properties of tetragons from Mathopenref
• A (dynamic) Hierarchical Quadrilateral Tree at Dynamic Geometry Sketches
• An extended classification of quadrilaterals at Dynamic Math Learning Homepage
• Quadrilateral Venn Diagram Quadrilaterals expressed in the form of a Venn diagram, where the areas are also the shape of the quadrilateral they describe.
• The role and function of a hierarchical classification of quadrilaterals by Michael de Villiers

Regular polygons Listed by number of sides 1–10 sides Henagon (Monogon) Digon Equilateral triangle Square Pentagon Hexagon Heptagon Octagon Nonagon (Enneagon) Decagon 11–20 sides Hendecagon Dodecagon Tridecagon Tetradecagon Pentadecagon Hexadecagon Heptadecagon Octadecagon Nonadecagon (Enneadecagon) Icosagon Others Triacontagon Chiliagon Megagon Apeirogon Star polygons Pentagram Hexagram Heptagram Octagram Enneagram Decagram Hendecagram Dodecagram