1.act of writing in code or cipher
definition of Wikipedia
qualificatif d'une écriture (fr)[DomaineDescription]
write - coding, cryptography, secret writing, steganography - encoding, encryption - cipher, cypher - code - cipher, ciphertext, cryptograph, cypher, secret code - code, computer code - coder, computer programmer, programmer, software engineer - cryptanalysis, cryptanalytics, cryptography, cryptology - cryptographically[Dérivé]
committal to writing, writing[Hyper.]
character encoding, cipher, code, cypher, encipher, encode, encrypt, inscribe, write in code - cryptanalyst, cryptographer, cryptologist - cryptanalytic, cryptographic, cryptographical, cryptologic, cryptological[Dérivé]
Steganography () is the art and science of writing hidden messages in such a way that no one, apart from the sender and intended recipient, suspects the existence of the message, a form of security through obscurity. The word steganography is of Greek origin and means "concealed writing" from the Greek words steganos (στεγανός) meaning "covered or protected", and graphei (γραφή) meaning "writing". The first recorded use of the term was in 1499 by Johannes Trithemius in his Steganographia, a treatise on cryptography and steganography disguised as a book on magic. Generally, messages will appear to be something else: images, articles, shopping lists, or some other covertext and, classically, the hidden message may be in invisible ink between the visible lines of a private letter.
The advantage of steganography, over cryptography alone, is that messages do not attract attention to themselves. Plainly visible encrypted messages—no matter how unbreakable—will arouse suspicion, and may in themselves be incriminating in countries where encryption is illegal. Therefore, whereas cryptography protects the contents of a message, steganography can be said to protect both messages and communicating parties.
Steganography includes the concealment of information within computer files. In digital steganography, electronic communications may include steganographic coding inside of a transport layer, such as a document file, image file, program or protocol. Media files are ideal for steganographic transmission because of their large size. As a simple example, a sender might start with an innocuous image file and adjust the color of every 100th pixel to correspond to a letter in the alphabet, a change so subtle that someone not specifically looking for it is unlikely to notice it.
The first recorded uses of steganography can be traced back to 440 BC when Herodotus mentions two examples of steganography in his Histories. Demaratus sent a warning about a forthcoming attack to Greece by writing it directly on the wooden backing of a wax tablet before applying its beeswax surface. Wax tablets were in common use then as reusable writing surfaces, sometimes used for shorthand.
In his work "Polygraphiae" Johannes Trithemius developed his so-called "Ave-Maria-Cipher" with which one can hide information in a Latin praise of God. "Auctor Sapientissimus Conseruans Angelica Deferat Nobis Charitas Potentissimi Creatoris" for example contains the concealed word VICIPEDIA.
Steganography has been widely used, including in recent historical times and the present day. Possible permutations are endless and known examples include:
||This article needs attention from an expert on the subject. Please add a reason or a talk parameter to this template to explain the issue with the article. WikiProject History of Science or the History of Science Portal may be able to help recruit an expert. (May 2008)|
Modern steganography entered the world in 1985 with the advent of the personal computer being applied to classical steganography problems. Development following that was slow, but has since taken off, going by the number of "stego" programs available:
All information hiding techniques that may be used to exchange steganograms in telecommunication networks can be classified under the general term of network steganography. This nomenclature was originally introduced by Krzysztof Szczypiorski in 2003. Contrary to the typical steganographic methods which utilize digital media (images, audio and video files) as a cover for hidden data, network steganography utilizes communication protocols' control elements and their basic intrinsic functionality. As a result, such methods are harder to detect and eliminate.
Typical network steganography methods involve modification of the properties of a single network protocol. Such modification can be applied to the PDU (Protocol Data Unit), to the time relations between the exchanged PDUs, or both (hybrid methods).
Moreover, it is feasible to utilize the relation between two or more different network protocols to enable secret communication. These applications fall under the term inter-protocol steganography.
Network steganography covers a broad spectrum of techniques, which include, among others:
Digital steganography output may be in the form of printed documents. A message, the plaintext, may be first encrypted by traditional means, producing a ciphertext. Then, an innocuous covertext is modified in some way so as to contain the ciphertext, resulting in the stegotext. For example, the letter size, spacing, typeface, or other characteristics of a covertext can be manipulated to carry the hidden message. Only a recipient who knows the technique used can recover the message and then decrypt it. Francis Bacon developed Bacon's cipher as such a technique.
The ciphertext produced by most digital steganography methods, however, is not printable. Traditional digital methods rely on perturbing noise in the channel file to hide the message, as such, the channel file must be transmitted to the recipient with no additional noise from the transmission. Printing introduces much noise in the ciphertext, generally rendering the message unrecoverable. There are techniques that address this limitation, one notable example is ASCII Art Steganography.
Unicode steganоgraphy uses lookalike characters of the usual ASCII set to look normal, while really carrying extra bits of information. If the text is displayed correctly, there should be no visual difference from ordinary text. Some systems, however, may display the fonts differently, and the extra information would be easily spotted.
This is the art of concealing data in an image using Sudoku which is used like a key to hide the data within an image. Steganography using sudoku puzzles has as many keys as there are possible solutions of a Sudoku puzzle, which is . This is equivalent to around 70 bits, making it much stronger than the DES method which uses a 56 bit key.
The choice of embedding algorithm in the most cases is driven by the results of the steganographic channel robustness analysis . One of the areas that improves steganographic robustness is usage of a key scheme for embedding messages. Various key steganographic schemes have various levels of protection. Key scheme term means a procedure of how to use key steganographic system based on the extent of its use. However, when the steganographic robustness is increased a bandwidth of the whole embedding system is decreased. Therefore the task of a scheme selection for achieving the optimal values of the steganographic system is not trivial.
Embedding messages in steganographic system can be carried out without use of a key or with use of a key. To improve steganographic robustness key can be used as a verification option. It can make an impact on the distribution of bits of a message within a container, as well as an impact on the procedure of forming a sequence of embedded bits of a message.
The first level of protection is determined only by the choice of embedding algorithm. This may be the least significant bits modification algorithm, or algorithms for modifying the frequency or spatial-temporal characteristics of the container. The first level of protection is presented in any steganographic channel. Steganographic system in this case can be represented as shown at The First Protection Level Scheme figure. There following notations are used: c - is a container file; F - steganographic channel space (frequency or/and amplitude container part, that is available for steganographic modification and message signal transmission); SC - steganographic system; m - message to be embedded; E - embedding method; ĉ - modified container file.
The second protection level of the steganographic system, as well as all levels of protection of the higher orders, is characterized by the use of Key (password) via steganographic modification. An example of a simple key scheme, which provides a second level of protection, is to write the unmodified or modified password in the top or bottom of the message; or the distribution of the password sign on the entire length of the steganographic channel. Such key schemes do not affect the distribution of messages through the container and do not use a message preprocessing according to the defined key (see figure The Second Protection Level Scheme). This kind of steganographic systems are used in such tasks as, for instance, adding a digital signature for proof of copyright. Data embedding performance is not changed in comparison with the fastest approach of the first protection level usage.
Steganographic data channels that use key schemes based distribution of a message through the container and or preprocessing of an embedded message for data hiding are more secure. When the third protection level key scheme is used it affects the distribution of a message through the container (see figure The Third Protection Level Scheme, where F(P, L) – distribution function of a message within a container; P – minimum number of container samples that are needed to embed one message sample; L – step of a message distribution within a container). Accordingly, the performance of container processing will be lower than in the case of the first and the second key schemes. Taking into account that P≥L, the simplest representation of the F(P, L) function could be as following:
F(P, L) = cycle*L + step*P,
where cycle is a number of the current L section and step is a number of the embedded message sample.
The difference between the fourth protection level scheme and the third one is that in steganographic system there are two distribution functions of a message within a container are used. The first is responsible for a message samples selection according to some function G(Q, N), and the second function F(P, L) is responsible for position selection in a container for message sample hiding. Here Q – the size of message block to be inserted; N – the size (in bits) of one sample of the message file (see figure The Fourth Protection Level Scheme).
Based on the above discussion it is possible to define a classification table of key steganographic schemes:
|Steganographic system protection level||Steganographic algorithm usage||Key (password) usage||Key influence on a message signal bits distribution per container||Key influence on a message signal bits selection and distribution per container|
In general, terminology analogous to (and consistent with) more conventional radio and communications technology is used; however, a brief description of some terms which show up in software specifically, and are easily confused, is appropriate. These are most relevant to digital steganographic systems.
The payload is the data to be covertly communicated. The carrier is the signal, stream, or data file into which the payload is hidden; which differs from the "channel" (typically used to refer to the type of input, such as "a JPEG image"). The resulting signal, stream, or data file which has the payload encoded into it is sometimes referred to as the package, stego file, or covert message. The percentage of bytes, samples, or other signal elements which are modified to encode the payload is referred to as the encoding density and is typically expressed as a number between 0 and 1.
In a set of files, those files considered likely to contain a payload are called suspects. If the suspect was identified through some type of statistical analysis, it might be referred to as a candidate.
Detection of physical steganography requires careful physical examination, including the use of magnification, developer chemicals and ultraviolet light. It is a time-consuming process with obvious resource implications, even in countries where large numbers of people are employed to spy on their fellow nationals. However, it is feasible to screen mail of certain suspected individuals or institutions, such as prisons or prisoner-of-war (POW) camps. During World War II, a technology used to ease monitoring of POW mail was specially treated paper that would reveal invisible ink. An article in the June 24, 1948 issue of Paper Trade Journal by the Technical Director of the United States Government Printing Office, Morris S. Kantrowitz, describes in general terms the development of this paper, three prototypes of which were named Sensicoat, Anilith, and Coatalith paper. These were for the manufacture of post cards and stationery to be given to German prisoners of war in the US and Canada. If POWs tried to write a hidden message the special paper would render it visible. At least two US patents were granted related to this technology, one to Mr. Kantrowitz, No. 2,515,232, "Water-Detecting paper and Water-Detecting Coating Composition Therefor", patented July 18, 1950, and an earlier one, "Moisture-Sensitive Paper and the Manufacture Thereof", No. 2,445,586, patented July 20, 1948. A similar strategy is to issue prisoners with writing paper ruled with a water-soluble ink that "runs" when in contact with a water-based invisible ink.
In computing, detection of steganographically encoded packages is called steganalysis. The simplest method to detect modified files, however, is to compare them to known originals. For example, to detect information being moved through the graphics on a website, an analyst can maintain known-clean copies of these materials and compare them against the current contents of the site. The differences, assuming the carrier is the same, will compose the payload. In general, using extremely high compression rate makes steganography difficult, but not impossible. While compression errors provide a hiding place for data, high compression reduces the amount of data available to hide the payload in, raising the encoding density and facilitating easier detection (in the extreme case, even by casual observation).
Steganography is used by some modern printers, including HP and Xerox brand color laser printers. Tiny yellow dots are added to each page. The dots are barely visible and contain encoded printer serial numbers, as well as date and time stamps.
The larger the cover message is (in data content terms—number of bits) relative to the hidden message, the easier it is to hide the latter. For this reason, digital pictures (which contain large amounts of data) are used to hide messages on the Internet and on other communication media. It is not clear how commonly this is actually done. For example: a 24-bit bitmap will have 8 bits representing each of the three color values (red, green, and blue) at each pixel. If we consider just the blue there will be 28 different values of blue. The difference between 11111111 and 11111110 in the value for blue intensity is likely to be undetectable by the human eye. Therefore, the least significant bit can be used (more or less undetectably) for something else other than color information. If we do it with the green and the red as well we can get one letter of ASCII text for every three pixels.
Stated somewhat more formally, the objective for making steganographic encoding difficult to detect is to ensure that the changes to the carrier (the original signal) due to the injection of the payload (the signal to covertly embed) are visually (and ideally, statistically) negligible; that is to say, the changes are indistinguishable from the noise floor of the carrier. Any medium can be a carrier, but media with a large amount of redundant or compressible information are better suited.
From an information theoretical point of view, this means that the channel must have more capacity than the "surface" signal requires; that is, there must be redundancy. For a digital image, this may be noise from the imaging element; for digital audio, it may be noise from recording techniques or amplification equipment. In general, electronics that digitize an analog signal suffer from several noise sources such as thermal noise, flicker noise, and shot noise. This noise provides enough variation in the captured digital information that it can be exploited as a noise cover for hidden data. In addition, lossy compression schemes (such as JPEG) always introduce some error into the decompressed data; it is possible to exploit this for steganographic use as well.
Steganography can be used for digital watermarking, where a message (being simply an identifier) is hidden in an image so that its source can be tracked or verified (for example, Coded Anti-Piracy), or even just to identify an image (as in the EURion constellation).
When one considers that messages could be encrypted steganographically in e-mail messages, particularly e-mail spam, the notion of junk e-mail takes on a whole new light. Coupled with the "chaffing and winnowing" technique, a sender could get messages out and cover their tracks all at once.
Rumors about terrorists using steganography started first in the daily newspaper USA Today on February 5, 2001 in two articles titled "Terrorist instructions hidden online" and "Terror groups hide behind Web encryption". In July the same year, an article was titled even more precisely: "Militants wire Web with links to jihad". A citation from the article: "Lately, al-Qaeda operatives have been sending hundreds of encrypted messages that have been hidden in files on digital photographs on the auction site eBay.com". Other media worldwide cited these rumors many times, especially after the terrorist attack of 9/11, without ever showing proof. The Italian newspaper Corriere della Sera reported that an Al Qaeda cell which had been captured at the Via Quaranta mosque in Milan had pornographic images on their computers, and that these images had been used to hide secret messages (although no other Italian paper ever covered the story). The USA Today articles were written by veteran foreign correspondent Jack Kelley, who in 2004 was fired after allegations emerged that he had fabricated stories and sources.
In October 2001, the New York Times published an article claiming that al-Qaeda had used steganography to encode messages into images, and then transported these via e-mail and possibly via USENET to prepare and execute the September 11, 2001 terrorist attack. The Federal Plan for Cyber Security and Information Assurance Research and Development, published in April 2006 makes the following statements:
Moreover, an online "terrorist training manual", the "Technical Mujahid, a Training Manual for Jihadis" contained a section entitled "Covert Communications and Hiding Secrets Inside Images."
By early 2002, a Cranfield University MSc thesis developed the first practical implementation of an online real-time Counter Terrorist Steganography Search Engine. This was designed to detect the most likely image steganography in transit and thereby provide UK Ministry of Defence Intelligence Staff a realistic approach to "narrowing the field", suggesting that interception capacity was never the difficulty but rather prioritising the target media.
According to recently found material, hidden messages from Al-Qaeda were found in a stash of pornography.
In 2010, the Federal Bureau of Investigation revealed that the Russian foreign intelligence service uses customized steganography software for embedding encrypted text messages inside image files for certain communications with "illegal agents" (agents under non-diplomatic cover) stationed abroad.
Dictionary and translator for handheld
New : sensagent is now available on your handheld
A windows (pop-into) of information (full-content of Sensagent) triggered by double-clicking any word on your webpage. Give contextual explanation and translation from your sites !
With a SensagentBox, visitors to your site can access reliable information on over 5 million pages provided by Sensagent.com. Choose the design that fits your site.
Improve your site content
Add new content to your site from Sensagent by XML.
Crawl products or adds
Get XML access to reach the best products.
Index images and define metadata
Get XML access to fix the meaning of your metadata.
Please, email us to describe your idea.
Lettris is a curious tetris-clone game where all the bricks have the same square shape but different content. Each square carries a letter. To make squares disappear and save space for other squares you have to assemble English words (left, right, up, down) from the falling squares.
Boggle gives you 3 minutes to find as many words (3 letters or more) as you can in a grid of 16 letters. You can also try the grid of 16 letters. Letters must be adjacent and longer words score better. See if you can get into the grid Hall of Fame !
Change the target language to find translations.
Tips: browse the semantic fields (see From ideas to words) in two languages to learn more.